Aluminum Titanium (AlTi) Sputtering Target

Our Aluminum Titanium (AlTi) alloy Sputtering Targets are produced by HIP technology, widely used for tool coating and decorative coating.Compared to melting technology, TiAl targets that produced by HIP technology have more uniform micro-inner structure, smaller grain size, and suitable for various magnetron sputtering machines and ion plating machines. End user can obtain constant erosion rates as well as high purity and homogeneous thin film coating during PVD process.

Besides, those tools coated by AlTi thin films have higher feed speeds, better cutting performance, longer service life and higher metal removal rates can be achieved without difficulty.

Aluminum Titanium Sputtering Targets and arc cathodes are also used for decorative coating, to obtain golden brown and brownish black color films.End user can obtain good hardness, high brightness, corrosion and oxidation resistant color without discolor for a very long time.

Our targets have already been qualified by many end users, including manufacturers of watch, sanitary ware, car mirrors, and etc. We have AlTi25/75at%, AlTi30/70at%, AlTi33/67at%, AlTi40/60at%, AlTi50/50at% for your reference.

AlTi70/30at% targets and cathodes for decorative and tool coating. The flexibility of our production process allow the microstructure of our coating materials be adjusted to achieve your desired effect. If grains of sputtering target are uniformly aligned, the user can benefit from constant erosion rates and homogeneous layers.

(1) Hard coating
Cutting tools:
Microhardness ≥ 25GPa (Al30Ti70N)
Friction coefficient < 0.4 (paired with steel)
Mold protection:
Service life extended by 3-5 times
Heat resistance up to 800℃
(2) Aerospace
Engine blades:
Oxidation resistance (weight gain < 2mg/cm² at 1100℃/100h)
Thermal barrier coating bonding strength ≥ 50MPa
Fleet structure:
Fatigue life increased by 2 times
Corrosion current density < 1μA/cm²
(3) Electronic devices
Diffusion barrier layer:
Resistance to Cu diffusion (no penetration at 600℃/100h)
Contact resistance < 10⁻⁷Ω·cm²

AlTi25/75at% sputtering target

AlTi30/70at% sputtering target

AlTi33/67at% sputtering target

AlTi40/60at% sputtering target

AlTi50/50at% sputtering target

AlTi70/30at% sputtering target

FAQ

Are you a factory or manufacturer?
A: Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.

What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.

Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.

Do you do spot quality inspection or full inspection?
A: 100% full inspection for sure. All unqualified products are discarded.

How do you ensure your lead time?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.

What is the MOQ of Aluminum Titanium (AlTi) Sputtering Target ?
A: Depends on quantity, generally, no MOQ limit.

How to pay for it?
A: A bank transfer (T/T) will be acceptable.

What is the delivery time?
A: around 7-20 days which depends on the quantity and production.

What is kind of the package?
A: Generally, we use a carton case or plywood case with protective material inside to ensure the save of cargo

What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.

Hot Tags: aluminum titanium (alti) sputtering target, China aluminum titanium (alti) sputtering target suppliers, factory, Cobalt Chrome Alloy Valve Seat, , Nickel201 Wire, , , Beryllium Windows X Ray Tube