Products Description
Molybdenum Boat
🔹 Structure and characteristics
Shape: usually boat-shaped (U-shaped or V-shaped groove), convenient for holding powders, particles or small-sized materials.
Material: high-purity molybdenum (Mo≥99.95%) or molybdenum alloy (such as TZM, containing Ti, Zr).
Temperature resistance: can be used for a long time up to 1800℃ in vacuum or inert atmosphere.
Features:
Good thermal conductivity and uniform heating.
Strong thermal shock resistance, but low-temperature brittleness should be noted.
🔹 Main applications
Vacuum coating: used for evaporation sources (such as evaporation of Al, Au, Ag and other metals).
High-temperature sintering: sintering support of ceramics, rare earth materials, and silicon carbide.
Single crystal growth: melting support of sapphire (Al₂O₃) and LED substrate materials.
Electronics industry: semiconductor chip annealing and diffusion process.
Molybdenum Tray
🔹 Structure and characteristics
Shape: flat or shallow dish, suitable for carrying large size or sheet materials.
Material: high purity molybdenum or molybdenum alloy (TZM).
Temperature resistance: up to 2000℃ (short term) in inert atmosphere, long-term use is recommended to be ≤1800℃.
Features:
Large bearing area, suitable for batch processing.
Surface can be polished (Ra<0.8μm) to reduce contamination.
🔹 Main applications
Photovoltaic industry: carrier substrate for directional solidification of silicon ingots (DSS furnace).
Semiconductor manufacturing: high temperature annealing of wafers, epitaxial growth trays.
Powder metallurgy: high temperature sintering brackets for tungsten, molybdenum, and tungsten carbide.
Laboratory: placement of high temperature experimental samples (such as ceramic sintering, CVD deposition).
Type and Size
|
Item |
Molybdenum Pure boat for MIM and Melting |
|
Grade |
Mo1 |
|
Density |
10.2g/cm3 |
|
Purity |
99.95% |
|
Feature |
High temperature resistance |
|
Working Temperature |
Up to 1400 Centigrade |
|
Size |
Quadrate box, Round barrel, per drawing |
|
Process Method |
Riveted Molybdenum Boat |
Chemical requirements
|
Fe |
Ni |
C |
Al |
O |
N |
|
0.004 |
0.002 |
0.0028 |
0.0005 |
0.005 |
0.002 |
|
Si |
Ca |
Mg |
Cd |
Sb |
Sn |
|
0.0013 |
< 0.001 |
< 0.0005 |
< 0.001 |
< 0.0005 |
< 0.0005 |
|
P |
Cu |
Pb |
Bi |
Mo |
|
|
< 0.001 |
< 0.0005 |
< 0.0005 |
< 0.0005 |
>99.95% |
We can also supply you stamped molybdenum boats, welded molybdenum boats.
Also tungsten evaporation boats with different design are also available.
Features
Molybdenum riveted boats are formed from processed molybdenum plates that have undergone cutting, folding, riveting, welding.
For customer convenience, these molybdenum boats can be shaped to various specifications including square, rectangular, round, trapezoidal, etc.
Molybdenum Boat vs Molybdenum Tray
| Feature | Molybdenum Boat | Molybdenum Tray |
| Shape | U/V-shaped groove, suitable for small particles | Flat plate, suitable for large-sized materials |
| Main Use | Evaporation coating, small batch sintering | Wafer annealing, silicon ingot solidification |
| Loading Method | Holding powder or molten materials | Placing sheet or block materials |
| Temperature Limit | ≤1800℃ (long-term) | ≤2000℃ (short-term) |
| Cost | Lower (small size) | Higher (large size customization) |
Molybdenum boat → Suitable for evaporation of small particle materials, coating, and small-scale sintering.
Molybdenum tray → Suitable for large-size wafers, silicon ingots, and batch high-temperature processing.
Common points of attention: Avoid oxidation and use in vacuum/inert atmosphere!

FAQ Molybdenum Boat and Molybdenum Tray
1. What is the main difference between a molybdenum boat and a molybdenum tray?
✅ Molybdenum Boat:
Shape: U-shaped or V-shaped groove, suitable for holding powders, granules or small-sized materials.
Application: evaporation coating, small batch high-temperature sintering, single crystal growth.
Features: uniform heating, suitable for local high-temperature treatment.
✅ Molybdenum Tray:
Shape: flat or shallow tray, suitable for carrying large-sized sheet materials (such as silicon wafers, wafers).
Application: photovoltaic silicon ingot solidification, semiconductor annealing, batch sintering.
Features: large bearing area and high stability.
2. What is the high temperature limit of molybdenum products?
Short-term use: up to 2000℃ (inert atmosphere or vacuum required).
Long-term use: recommended ≤1800℃, otherwise it may accelerate oxidation or deformation.
3. Are you a factory ?
Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be convenient to receive the remittance and arrange the shipment.
4. What is the MOQ of Molybdenum boat or tray
A: Depends on quantity, generally, no MOQ limit.
5. How to pay for it?
A: A bank transfer (T/T) will be acceptable.
6. What is the delivery time?
A: around 7-20 days which depends on the quantity and production.
7. What is kind of the package?
A: generally, we use carton case or plywood case and with protective material inside to ensure the save of cargo
8. What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.
9. What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.
Hot Tags: Molybdenum Riveted Boat Molybdenum Tray, China Molybdenum Riveted Boat Molybdenum Tray suppliers, factory, Molybdenum Round Bar, Pure Molybdenum


