TZM alloy is a refractory composite alloy known for its resistance to high-temperature and thermal fatigue. The material is also popular for its stability, good thermal conductivity and high strength-to-weight ratio, making it an ideal material for use in harsh, demanding and critical environments.
The molybdenum ( TZM ) piercing mandrel is a critical component used for piercing seamless tubes of stainless, alloy steel and high-temperature alloy, etc. It is typically made of a molybdenum alloy (TZM alloy), which has excellent high-temperature strength and oxidation resistance. The high-temperature stability and corrosion resistance of molybdenum (TZM) piercing mandrels make them an essential component in the making seamless tubes process.
Specificaton:
|
Product name |
Molybdenum piercing mandrel, molybdenum plugs |
|
Name of material |
TZM, see table 1 |
|
Density |
>=9.35g/cm3 |
|
Sizes |
Dia20-300mm * Length ( customizing as the drawing ), see table 2 |
|
Surface |
Sintering, finished surface |
|
Character |
High temperature strength, good oxidation resistance, long life service |
|
Application |
Used for piercing seamless tubes of stainless, alloy steel and high-temperature alloy, etc. |
Table 1
|
Elements |
Content (%) |
|
|
Mo |
See Note |
|
|
Ti |
1.0 ˜ 2.0 |
|
|
Zr |
0.1 ˜ 2.0 |
|
|
C |
0.1 ˜ 0.5 |
|
|
Chemical elements / not more than |
Fe |
0.0060 |
|
Ni |
0.0030 |
|
|
Al |
0.0020 |
|
|
Si |
0.0030 |
|
|
Ca |
0.0020 |
|
|
Mg |
0.0020 |
|
|
P |
0.0010 |
|
Table 2
|
Diameter |
Tolerance of diameter |
Length |
Tolerance of length |
Semifinished type |
|
20-40mm |
0 to +2mm |
60-80mm |
0 to +3mm |
A type |
|
45-55mm |
0 to +2mm |
80-110mm |
0 to +3mm |
A type |
|
60-80mm |
0 to +3mm |
160-200mm |
0 to +4mm |
B type |
|
85-100mm |
0 to +4mm |
180-260mm |
0 to +5mm |
B type |
|
110-150mm |
0 to +5mm |
200-300mm |
0 to +6mm |
B type |
|
160-250mm |
0 to +6mm |
280-350mm |
0 to +8mm |
B type |
TYPE A
TYPE B
