Molybdenum Copper Alloy Rod

The molybdenum-copper alloy formed after adding copper has the advantages of reduced material hardness, improved plasticity and processing performance, low gas content, good vacuum performance, high electrical conductivity and excellent high temperature resistance, and can be processed into parts with complex shapes. Molybdenum Copper Alloy Rod is mainly produced by molybdenum skeleton immersion method. First, molybdenum powder is pressed and molded, and sintered into a molybdenum skeleton with a certain porosity, and then copper is infiltrated and then machined together.

The high-performance Molybdenum Copper Alloy Rod produced by it is very suitable for use as electrodes for resistance welding, heat dissipation materials for power amplifiers, electronic packaging and heat sink materials, electrodes for EDM, non-magnetic materials and military high-temperature components. Molybdenum Copper Alloy Rod is commonly used in three grades of Mo80Cu20, Mo70Cu30 and Mo75Cu25, and rods with different diameter.

1. Gradient composition design: The gradient distribution of Mo content from the core (90%) to the surface (70%) is achieved through powder metallurgy technology, taking into account both strength and thermal conductivity.
2. High elastic modulus: The elastic modulus reaches 320GPa, suitable for high stiffness structural parts.
3. Thermal shock resistance: In a rapid hot and cold cycle from 500°C to room temperature, the thermal shock resistance parameters (ΔT·R⁻¹) are ≥2000°C·cm²/W.

Molybdenum copper alloy rod is used for the transition section at the root of turbine blades, which can withstand high temperatures of 1200 ℃ and stresses of 800MPa.

The molybdenum copper alloy rod serves as the support structure for the polarizer target plate and can withstand a neutron irradiation flux of 10 MeV.

Molybdenum copper alloy rods are used as current leads for low-temperature superconducting coils, maintaining a conductivity of 90% IACS in the 4K temperature range.

Are you a factory or manufacturer?
A: Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.

What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.

Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.

Do you do spot quality inspection or full inspection?
A: 100% full inspection for sure. All unqualified products are discarded.

How do you ensure your lead time?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.

What is the MOQ of Molybdenum Copper Alloy Rod?
A: Depends on quantity, generally, no MOQ limit.

How to pay for it?
A: A bank transfer (T/T) will be acceptable.

What is the delivery time?
A: around 7-20 days which depends on the quantity and production.

What is kind of the package?
A: Generally, we use a carton case or plywood case with protective material inside to ensure the save of cargo

What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.

Hot Tags: molybdenum copper alloy rod, China molybdenum copper alloy rod suppliers, factory, Kovar Seamless Pipe, TiAl Targets