Monel K-500 square plate
Monel K-500 square plate is a nickel-copper alloy (with about 63% nickel and 30% copper). It is made stronger and more corrosion-resistant by adding aluminum and titanium and going through a heat treatment process called aging.
Monel K-500 square plate is made into flat rectangular shapes by hot rolling or cold rolling. It comes in standard sizes like 1m×1m or 2m×2m. The thickness can be from 3mm to 50mm. The surface can be polished, pickled, or machined.
Monel K-500 square plate is used in many areas. In marine engineering, it is used for ship parts and seawater pumps. In the petrochemical industry, it is used for corrosion-resistant valves and drill collars. In aerospace, it is used for fasteners and engine parts. In medical equipment, it is used for surgical tools. In chemical equipment, it is used for mixers and heat exchangers. Its high strength, corrosion resistance, and ability to resist biofouling make it a key material for extreme environments.
Features of Monel K-500 square plate
High strength and hardness: After aging, Monel K-500 square plate can have a tensile strength of over 1000 MPa. It is stronger than Monel 400 but still has good toughness.
Excellent corrosion resistance: Monel K-500 square plate can resist seawater, acidic media (like sulfuric acid and hydrofluoric acid), and chloride stress corrosion. It is good for tough environments.
Anti-biofouling: Monel K-500 square plate is especially good for marine use. It can stop microorganisms from sticking to it.
Thermal stability: Monel K-500 square plate works well between -200°C and 480°C. It is good for extreme temperatures.
Workability: Monel K-500 square plate is harder to work with than Monel 400. But it can be shaped with the right methods, like low-speed cutting and cooling lubrication.
Applications of Monel K-500 square plate
Marine engineering: Monel K-500 square plate is used for seawater pump shafts, ship propellers, and underwater valve parts. It resists salt spray corrosion.
Petrochemical: Monel K-500 square plate is used to make drill collars and valve plates for oil and gas drilling. It can stand up to hydrogen sulfide and high pressure.
Aerospace: Monel K-500 square plate is used for rocket engine parts and fasteners. It is light and strong.
Medical equipment: Monel K-500 square plate is used for surgical tools and implants. It is biocompatible and can resist disinfectant corrosion.
Industrial parts: Monel K-500 square plate is used for mixers and heat exchanger plates in chemical processing. It helps extend equipment life.
|
Parameter |
Specification Range |
Remarks |
|
Standard Size (mm) |
1000×1000, 1200×1200, 1500×1500, 2000×2000 |
Custom sizes available |
|
Thickness (mm) |
3 – 50 |
Common: 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 |
|
Width (mm) |
1000 – 2000 |
Adjustable per requirements |
|
Length (mm) |
1000 – 6000 |
Typically square or rectangular cuts |
|
Surface Finish |
Hot Rolled, Cold Rolled, Pickled, Polished |
Also available: Sandblasted, Machined |
|
Hardness (HRC) |
25 – 35 |
Enhanced after age hardening |
|
Tensile Strength (MPa) |
≥ 1000 |
Typical: 1000 – 1300 MPa |
|
Yield Strength (MPa) |
≥ 700 |
Typical: 700 – 900 MPa |
|
Elongation (%) |
≥ 20 |
Maintains good ductility after aging |
|
Density (g/cm³) |
8.44 |
Similar to Monel 400 |
|
Standards |
ASTM B865, AMS 4676, DIN 17752 |
Can comply with customer-specified standards |
FAQ
Are you a factory or manufacturer?
A: Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.
What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.
Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.
Do you do spot quality inspection or full inspection?
A: 100% full inspection for sure. All unqualified products are discarded.
How do you ensure your lead time?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.
What is the MOQ of Monel K-500 square plate?
A: Depends on quantity, generally, no MOQ limit.
How to pay for it?
A: A bank transfer (T/T) will be acceptable.
What is the delivery time?
A: around 7-20 days which depends on the quantity and production.
What is kind of the package?
A: Generally, we use a carton case or plywood case with protective material inside to ensure the save of cargo
What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.
Hot Tags: monel k-500 square plate, China monel k-500 square plate suppliers, factory, Inconel 625 Pipe, Kovar Seamless Pipe, Nickel Based Alloys
