Gr2 Titanium Flange
Gr2 Titanium Flange are used to connect pipes, pumps, vales and other piping components together to create a piping network. They are used to split pipe networks to facilitate inspection and cleaning, and can be either screwed or welded to pipes. Flanged joints are typically bolted together with a gasket in between.
Our company supply titanium flange according to ASME B16.5 and EU standard EN10192. Which is connected to titanium pipe used in titanium equipment. Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ).
Gr2 Titanium Flange Processing includes annealed state (M) , hot working state (R) , cold working state (Y) (annealing, ultrasonic flaw detection). All products will be taken ultrasonic non-destructive inspection to ensure internal quality without cracks and defects. The advantages of Gr2 Titanium Flange has good anti-corrosion performance, light density and high strength.
Specification of Gr2 Titanium Flange
|
Grade |
GR2 |
|
Purity |
Ti≥99.2% |
|
Technique |
Cold Rolled,Cutting,Drilling,Machining,Grinding,Polishing |
|
Size |
1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|
Density |
4.5g/cm3 |
|
Surface |
Black,Acid pickling,Polished,Bright |
|
Pressure Rating |
Class 150 LBS-2500 LBS |
|
Elongation |
20% |
|
Standard |
ASTM B381,ANSI B16.5,GB |
Hot Tags: gr2 titanium flange, China gr2 titanium flange suppliers, factory, Nickel and Alloys, Beryllium Windows X Ray Tube, Zr702 Plate, TiAl Targets, Nickel201 Wire, Nickel Titanium Alloys Bar
