Description Of ASTM B348 Titanium Alloy Cylinder

Our titanium alloy billets meet the ASTM B348 international standard and are made by extrusion, forging, hot rolling, and cold working. Titanium Alloy Billet contains many properties of titanium, mainly non-magnetic, high temperature and low temperature resistance, good electrical and thermal conductivity, high stress absorption capacity, high tensile strength and yield strength, good recycling ability, etc.

ASTM B348 Titanium Alloy Cylinder can be made into various accessories and used in large machines such as tanks, aircraft, cranes, automobiles, power systems, ships, bridges, and drilling equipment.

In addition to ASTM B348 Titanium Alloy Cylinder, our company can also provide other titanium alloy products (such as titanium alloy wire, titanium alloy plate and titanium alloy tube), tungsten products (tungsten rod, tungsten electrode, tungsten heavy alloy products) and nickel products (such as Nickel rod, nickel wire) and other metal products.

product-700-700

Features of ASTM B348 Titanium Alloy Cylinder

Lightweight and high strength

With a density of only 4.5 g/cm³ (43% lighter than steel), Ti-6Al-4V has a tensile strength of 895-930 MPa, significantly reducing equipment weight and improving energy efficiency.

Excellent corrosion resistance

Resistant to seawater, chloride ions, acid, and alkali media (such as HCl, H₂SO₄), suitable for offshore platforms and chemical reaction equipment.

Long-term oxidation resistance temperature reaches 400°C (pure titanium) or 300°C (Ti-6Al-4V).

High fatigue life

Low notch sensitivity, suitable for high-frequency reciprocating motion scenarios (such as hydraulic cylinders, pneumatic actuators).

Biocompatibility (optional)

Medical-grade Ti-6Al-4V ELI complies with ASTM F136 and can be used in medical gas compression systems.

Precision machining adaptability

Supports turning, grinding, polishing, and other processes, and the inner wall can be plated with hard chrome or titanium nitride (TiN) to improve wear resistance.

Applications of ASTM B348 Titanium Alloy Cylinder

1. Aerospace
Aircraft landing gear hydraulic cylinders, fuel system high-pressure cylinders.

Satellite thruster pressure vessels.

2. High-end manufacturing
Semiconductor equipment vacuum chambers, laser cutting machine drive cylinders.

3. Shipbuilding and marine engineering
Deep-sea submersible pressure cylinders, seawater hydraulic system actuators.

4. Medical and food
Medical ventilator, hyperbaric oxygen chambers, sterile gas delivery cylinders.

Specification of ASTM B348 Titanium Alloy Cylinder

Grade	TC1,2,4,9,12
Technique	Hot Rolled, Cold Rolled, Cold Drawn, Forging, Annealing
Purity	Ti:99.5-99.9%
Diameter	Customized
Length	Customized
Width	Customized
Density	4.51g/cm3
Elongation	24%
Shape	Square, Round, Hexagonal, Flat
Surface	Polishing, Ground, Black Oxide, Pickled
Standard	ASTM B348

Testing and quality control of ASTM B348 Titanium Alloy Cylinder

• Dimensions: outer diameter tolerance ±0.1 mm, straightness ≤0.5 mm/m; three-coordinate full inspection.
• Non-destructive: ultrasonic C-Scan + X-ray flaw detection, defect equivalent ≤Φ0.8 mm.
• Mechanical: room temperature σb≥895 MPa, σ0.2≥825 MPa, δ≥10 %; high temperature 400 ℃ σ100h≥520 MPa.

product-760-700

FAQ For ASTM B348 Titanium Alloy Cylinder

Are you an ASTM B348 Titanium Alloy Cylinder factory or an ASTM B348 Titanium Alloy Cylinder manufacturer?
A: Yes, we are an ASTM B348 Titanium Alloy Cylinder factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.

What is the delivery method of ASTM B348 Titanium Alloy Cylinder?
A: Generally, we send ASTM B348 Titanium Alloy Cylinders by UPS, DHL or FedEx. Also, we can send by sea to a seaport or by air to the closest airport.

Why is your ASTM B348 Titanium Alloy Cylinder so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process, and we obtain raw material directly from its source.

Do you do spot quality inspection of ASTM B348 Titanium Alloy Cylinder or full inspection of ASTM B348 Titanium Alloy Cylinder?
A: 100% full inspection for sure. All unqualified ASTM B348 Titanium Alloy Cylinders are discarded.

How do you ensure your lead time for ASTM B348 Titanium Alloy Cylinder?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.

What is the MOQ of ASTM B348 Titanium Alloy Cylinder?
A: Depends on the quantity of ASTM B348 Titanium Alloy Cylinder, generally, no MOQ limit.

How to pay for ASTM B348 Titanium Alloy Cylinder?
A: A bank transfer (T/T) will be acceptable.

What is the delivery time of ASTM B348 Titanium Alloy Cylinder?
A: Around 7-20 days, which depends on the quantity and production of ASTM B348 Titanium Alloy Cylinders.

What kind of package of ASTM B348 Titanium Alloy Cylinder is it?
A: Generally, we use a carton case or a plywood case with protective material inside to ensure the safety of the ASTM B348 Titanium Alloy Cylinder.

What is the lead time of ASTM B348 Titanium Alloy Cylinder?
A: From the order placed to cargo receiving will take around 10-25 days.

product-700-700