Inconel 601 straight weld wires
Inconel 601 straight weld wires are a kind of nickel-chromium alloy welding material. They are designed for high-temperature and corrosion-resistant environments. The main components of Inconel 601 straight weld wires are nickel (Ni, about 58-63%), chromium (Cr, 21-25%) and aluminum (Al, 1.0-1.7%). They also contain a small amount of iron (Fe) and other trace elements. By optimizing the proportion of components, Inconel 601 straight weld wires have excellent oxidation resistance, high-temperature strength and welding performance. They are suitable for manual arc welding and gas shielded welding. They are often used to weld Inconel 601 workpieces of the same material or to weld dissimilar metals with other nickel-based alloys and stainless steel.
Inconel 601 straight weld wires are widely used in high-temperature and corrosion-resistant environments. These include gas turbine combustion chambers, petrochemical cracking furnaces, waste incinerators and aerospace exhaust systems. The excellent high-temperature oxidation resistance, anti-sulfide corrosion ability and stable welding performance of Inconel 601 straight weld wires make them the first choice for welding and repairing key parts in the fields of energy, chemical industry and environmental protection. They can significantly improve the service life and reliability of equipment.
Features of Inconel 601 straight weld wires
Excellent high-temperature performance:
Inconel 601 straight weld wires keep oxidation and carburization resistance at extreme temperatures up to 1175°C. This is thanks to the dense oxide layer formed by chromium and aluminum.
They have excellent high-temperature strength and anti-creep properties. They are suitable for long-term thermal cycling environments.
Excellent corrosion resistance:
Inconel 601 straight weld wires are resistant to oxidation, sulfidation and chloride corrosion. They are suitable for harsh industrial environments such as sulfur-containing exhaust gases and acidic media.
Good weldability:
Inconel 601 straight weld wires melt stably with little spatter. The weld bead is uniform and no complex post-weld heat treatment is needed.
Inconel 601 straight weld wires have low hot cracking sensitivity. They are suitable for multi-layer welding and dissimilar metal joining.
Mechanical property matching:
The strength and ductility of the weld metal of Inconel 601 straight weld wires highly match the base material (Inconel 601). This reduces the risk of stress concentration.
Appliations of Inconel 601 straight weld wires
Energy and chemical equipment:
Inconel 601 straight weld wires are used to weld gas turbine combustion chambers, heat exchangers, furnace tubes and cracking furnace internals. They resist high-temperature corrosion and thermal fatigue.
Environmental protection and exhaust gas treatment:
Inconel 601 straight weld wires are used to weld key parts in waste incinerators and flue gas desulfurization systems (FGD). They cope with the erosion of acidic gases.
Aerospace and automotive:
Inconel 601 straight weld wires are used to make high-temperature parts such as jet engine tailpipes and exhaust systems. They meet the needs of lightweight and durability.
Inconel 601 straight weld wires are used to repair or connect equipment such as heating furnace rollers and heat treatment fixtures. They extend the service life.
|
Parameter |
Typical Specifications |
Remarks |
|
Standard |
AWS A5.14 ERNiCrFe-11, ISO 18274 |
Complies with welding standards |
|
Diameter (mm) |
0.8, 1.0, 1.2, 1.6, 2.0, 2.4 |
Common sizes for TIG/MIG welding |
|
Length (mm) |
1000, 1500, 2000, 2500, 3000 |
Standard straight lengths |
|
Packaging |
Straight rods, small coils (on request) |
Typically supplied as straight cut wires |
|
Chemical Composition (%) |
Ni: 58-63, Cr: 21-25, Al: 1.0-1.7, Fe: ≤14, C: ≤0.1, Mn: ≤1.0, Si: ≤0.5 |
ASTM B166 compliant |
|
Tensile Strength |
≥550 MPa |
Typical as-welded strength |
|
Elongation |
≥30% |
Ductility of welded joints |
|
Welding Process |
TIG (GTAW), MIG (GMAW), SAW |
Recommended with inert gas shielding |
|
Shielding Gas |
100% Ar or Ar + He mix |
Minimizes oxidation |
|
Storage |
Dry, dust-free, anti-oxidation |
Sealed packaging recommended |
FAQ
Are you a factory or manufacturer?
A: Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.
What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.
Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.
Do you do spot quality inspection or full inspection?
A: 100% full inspection for sure. All unqualified products are discarded.
How do you ensure your lead time?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.
What is the MOQ of Inconel 601 straight weld wires ?
A: Depends on quantity, generally, no MOQ limit.
How to pay for it?
A: A bank transfer (T/T) will be acceptable.
What is the delivery time?
A: around 7-20 days which depends on the quantity and production.
What is kind of the package?
A: Generally, we use a carton case or plywood case with protective material inside to ensure the save of cargo
What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.
Hot Tags: inconel 601 straight weld wires, China inconel 601 straight weld wires suppliers, factory, Inconel 625 Pipe, Kovar Seamless Pipe, Nickel Based Alloys
