Copper Tungsten Inlaid Spot Weld Electrodes

Copper Tungsten Inlaid Spot Weld Electrodes are combination electrodes widely employed in spot and projection welding. The electrodes' business face comes into contact with the surface of the high temperature workpiece and endures sustained severe temperature and pressure cycles during welding engineering; hence, it is highly resistant to fatigue. Tungsten or tungsten alloy, which are difficult to mechanically reshape but conduct thermal energy rapidly, is the optimal selection.

Copper Tungsten Inlaid Spot Weld Electrodes are known for High melting point, high hardness, high corrosion resistance, and a considerable amount of electric conductivity. Current carrying ability, high quality welding, great cost effectiveness, extended service life are few of the supporting factors as well. They are mostly helpful in copiously welding non ferrous metals like copper, aluminum and nickel. Also, these electrodes are suitable for Counterparts which are considered heavy industry and need to withstand high temperatures. In terms of storage or transportation, electrodes need to be kept at places where there is no moisture, dust, air and sunlight. Curtains need to be placed over the windows in case direct sunlight needs to be blocked. Moreover, a proper diligent check up also needs to be performed. If the outside part of the user is damaged or is being worn off, immediate replacements will be required. Just as any other tool, it is also essential to remove the electrode from the holder and give it a patient clean up where the surface will be wiped gently with a cloth Cotton or soft fabric.

1. High temperature resistance and high current load: The high melting point of tungsten (3410°C) combined with the high conductivity of copper, suitable for high power resistance welding and spot welding.
2. Long life and wear resistance: The hardness and thermal stability of tungsten combined with the toughness of copper, the life span is longer than that of traditional electrodes and has a strong wear resistance.
3. High conductivity and thermal conductivity: Excellent conductivity and thermal conductivity, fast welding speed and high accuracy, suitable for scenarios with high efficiency requirements.
4. Anti-adhesion and stability: It is not easy to stick to the workpiece during welding, and has good stability and is suitable for high-load working conditions.

Copper tungsten inlaid spot weld electrodes are used for welding of micro speaker leads, induction IC card coils, buzzer leads, speaker leads, headphone leads, antenna leads, microphones, and vibration motor coils.
Copper tungsten inlaid spot weld electrodes are used for welding motors and clock coils, and are suitable for scenarios with high requirements for welding accuracy.
The copper tungsten inlaid spot weld electrode is used for welding between components on the module and PCB, and is suitable for contact welding of electronic components.

Are you a factory or manufacturer?
A: Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.

What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.

Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.

Do you do spot quality inspection or full inspection?
A: 100% full inspection for sure. All unqualified products are discarded.

How do you ensure your lead time?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.

What is the MOQ of Copper Tungsten Inlaid Spot Weld Electrodes?
A: Depends on quantity, generally, no MOQ limit.

How to pay for it?
A: A bank transfer (T/T) will be acceptable.

What is the delivery time?
A: around 7-20 days which depends on the quantity and production.

What is kind of the package?
A: Generally, we use a carton case or plywood case with protective material inside to ensure the save of cargo

What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.

Hot Tags: copper tungsten inlaid spot weld electrodes, China copper tungsten inlaid spot weld electrodes suppliers, factory, Tungsten Carbide Insert Blade, , Cobalt Chrome Alloy Valve Seat, , , Zirconium 702 Pipe