Inconel X-750 square plate
Inconel X-750 square plate is a nickel-chromium based superalloy. It is strengthened by adding aluminum and titanium to form gamma prime (γ') phase. It has excellent high-temperature strength, oxidation resistance, and corrosion resistance.
Inconel X-750 square plate is made by hot rolling or cold rolling. It has high dimensional accuracy and a smooth surface. It is suitable for precision machining.
The standard thickness range of Inconel X-750 square plate is usually from 0.5mm to 50mm. The side length can be customized according to customer needs.
Inconel X-750 square plate is widely used in aerospace (such as jet engine turbine rings, rocket parts), energy (nuclear reactor springs, heat exchangers), industry (high-temperature furnace components, gas turbine seals), and chemical (acid-resistant containers, reactor fasteners).
Inconel X-750 square plate is a key material in extreme environments because of its high-temperature strength, corrosion resistance, and fatigue resistance.
Features of Inconel X-750 square plate
High-temperature performance: Inconel X-750 square plate keeps high strength at up to 870°C. It has excellent creep and fatigue resistance.
Corrosion resistance: Inconel X-750 square plate resists oxidation, nitriding, and acid-alkali environments. It is suitable for harsh working conditions.
Mechanical properties: After aging heat treatment, Inconel X-750 square plate has a tensile strength of over 1030 MPa and good ductility.
Processability: Inconel X-750 square plate can be welded, forged, and machined. But it is prone to work hardening. It is better to use low speed and high feed rate.
Applications of Inconel X-750 square plate
Aerospace: Inconel X-750 square plate is used in jet engine turbine blade mounting rings and rocket engine parts.
Energy sector: Inconel X-750 square plate is used in springs, bolts, and heat exchanger components in nuclear reactors.
Industrial equipment: Inconel X-750 square plate is used in high-temperature furnace components and gas turbine seals.
Chemical industry: Inconel X-750 square plate is used in acid-resistant containers and fasteners for high-pressure reactors.
|
Category |
Specifications |
Remarks |
|
Standard Thickness (mm) |
0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0, 15.0, 20.0, 25.0, 30.0, 40.0, 50.0 |
Custom thickness available (e.g., 55mm, 60mm) |
|
Common Sizes (L×W, mm) |
100×100, 200×200, 300×300, 400×400, 500×500, 600×600, 1000×1000, 1200×1200, 1500×1500, 2000×2000 |
Max. single plate size typically ≤2500mm (mill-dependent) |
|
Thickness Tolerance (mm) |
±0.05 (Precision Cold Rolled), ±0.1 (Standard Cold Rolled), ±0.3 (Hot Rolled) |
Complies with ASTM B906 / AMS 5698 |
|
Flatness Tolerance |
≤0.3mm/m (Precision Grade), ≤1.0mm/m (Industrial Grade) |
Additional leveling required for high-precision applications |
|
Edge Condition |
Sheared, Laser Cut, Ground Edge |
Ground edges minimize burrs for critical components |
|
Heat Treatment |
Annealed, Aged (HTH or AT) |
HTH (High-Temp Aging) for creep resistance; AT (Standard Aging) for higher strength |
|
Surface Finish (Ra) |
0.8μm (Mirror Polish), 1.6μm (Fine Ground), 3.2μm (Cold Rolled), 6.3μm (Hot Rolled) |
Polished surfaces for sealing/corrosive environments |
|
Applicable Standards |
ASTM B906, AMS 5698, AMS 5667, NACE MR0175 |
Nuclear applications require ASME SB166 compliance |
FAQ
Are you a factory or manufacturer?
A: Yes, we are a factory but we generally use our trading company to handle the business abroad. It will be more convenient to receive the remittance and arrange the shipment.
What is the delivery method?
A: Generally, we send cargo by UPS, DHL or FedEx. Also, we can send by sea to seaport or by air to the closest airport.
Why is your product so cost-effective?
A: We cut out the middlemen in the end-to-end manufacturing process and we obtain raw material directly from its source.
Do you do spot quality inspection or full inspection?
A: 100% full inspection for sure. All unqualified products are discarded.
How do you ensure your lead time?
A: From material preparation to machining and finally to a full inspection. Every stage of production is strictly monitored and controlled to give you an accurate delivery time.
What is the MOQ of Inconel X-750 square plate ?
A: Depends on quantity, generally, no MOQ limit.
How to pay for it?
A: A bank transfer (T/T) will be acceptable.
What is the delivery time?
A: around 7-20 days which depends on the quantity and production.
What is kind of the package?
A: Generally, we use a carton case or plywood case with protective material inside to ensure the save of cargo
What is the lead time?
A: from order placed to cargo receiving will take around 10-25 days.
Hot Tags: inconel x-750 square plate, China inconel x-750 square plate suppliers, factory, Inconel 625 Pipe, Kovar Seamless Pipe, Nickel Based Alloys
